220V ZDN50 50mm High-Frequency Motor-in-Head Concrete Vibrator

1,800W Power Output for Flexible Single-Phase Jobsites

The ONNEW ZDN50/220V is a high-frequency internal concrete vibrator designed for general building work and jobsites with single-phase power. Its versatile 50mm motor-in-head direct-drive system delivers 1,800W of power output, 12,000 vpm, a 1.2mm amplitude and 5,372N of centrifugal force for foundations, walls, columns, slabs and other reinforced concrete structures. This combination gives the ZDN50/220V a clear performance advantage over many conventional 220V 50mm vibrators, delivering noticeably stronger vibration and more effective concrete consolidation.

Why the 220V ZDN50 Stands Out

• 1,800W Power Output: The integrated motor-in-head system delivers 1,800W of power output for fast, consistent consolidation in everyday structural concrete work.
• High Force in the 50mm Class: With 5,372N of centrifugal force, the ZDN50/220V delivers substantially stronger vibration than many conventional 220V 50mm models, helping release entrapped air faster and produce dense, uniform concrete.
• Wide Single-Phase Operating Range: Designed for AC 220–240V and guaranteed to operate across AC 190–250V at 50/60Hz, helping the machine handle common jobsite voltage fluctuations.
• Efficient Working Coverage: The 50mm head produces an effective vibration diameter of approximately 50cm, supporting productive consolidation across common structural pours.
• Motor-in-Head Direct Drive: The permanent-magnet motor and eccentric mechanism are integrated into the vibrating head, eliminating the traditional mechanical flexible shaft and maintaining consistent performance with different hose lengths.
• Immersion-Ready Frequency Converter: Not only the vibrator head but also the frequency converter inside its heat-dissipating protective housing is designed for powered immersion. The converter can be dragged around the jobsite and immersed in concrete slurry or muddy water together with the complete machine, without a routine operating-depth or runtime limit.
• Wireless Start/Stop Control: Two wireless remote controllers are supplied as standard for convenient single-operator control.
• Configurable Working Reach: A 6m rubber hose and 15m power cable are standard. Hose lengths from 1m to 50m and custom cable lengths are available for different project layouts.

The complete machine is supplied as an integrated assembly: vibrator head, rubber hose, frequency converter, power cable and localized industrial male plug. The standard 220V connection is a 3-pin 2P+E industrial male plug; other correctly matched local plug formats can be configured on request.

Power-connection note: The industrial male plug must be correctly wired and grounded, then paired with a compatible jobsite female socket or distribution-board outlet.

Frequently Asked Questions

What power supply does the 220V ZDN50 require?

It uses single-phase power with line, neutral and protective earth. Rated input is AC 220–240V, and the guaranteed operating range is AC 190–250V at 50/60Hz.

What is included in the complete machine?

The standard supply includes the vibrator head, 6m rubber hose, frequency converter, 15m power cable, localized industrial male plug and two wireless remote controllers. The jobsite female socket is not included.

Can the hose and cable lengths be customized?

Yes. Rubber hose lengths can be customized from 1m to 50m. Custom power-cable lengths are also available on request.

Can the frequency converter be dragged or immersed during operation?

Yes. Unlike conventional vibrators where only the head enters the concrete, the ONNEW frequency converter is protected by a robust heat-dissipating housing and is designed to remain powered while immersed. The converter and complete machine can be dragged around the jobsite and submerged in muddy water or concrete slurry as work progresses, without a routine operating-depth or runtime limit. The external power connection must always be correctly wired, grounded and paired with a compatible industrial female socket.

Can ONNEW provide a plug for my market?

Yes. The standard 220V plug is a 3-pin 2P+E industrial male plug. Other compatible local industrial plug formats can be configured according to the destination power system and connection requirements.

Configure the ZDN50/220V for Your Project

Tell ONNEW your destination country, jobsite power supply, required hose length, cable length, order quantity and application. Our team will confirm the correct plug configuration, provide a quotation and support OEM or project-specific requirements.

1. Versatile Single-Phase Compaction Performance

• 1,800W power output: The motor-in-head system delivers 1,800W of power output together with 12,000 vpm frequency and a 1.2mm amplitude.
• High force in the 50mm class: With 5,372N of centrifugal force, the ZDN50/220V delivers substantially stronger vibration than many conventional 220V 50mm models, helping release entrapped air faster and produce dense, uniform concrete.
• Versatile 50mm head: An effective vibration diameter of approximately 50cm makes it a practical choice for foundations, walls, columns, slabs and other reinforced concrete structures.

2. Direct-Drive Motor-in-Head Technology

• No traditional mechanical flexible shaft: The permanent-magnet motor and eccentric mechanism are integrated into the vibrator head, reducing the transmission losses and wear points associated with conventional external-motor shaft vibrators.
• Consistent performance at different reaches: Because the rubber hose does not transmit mechanical rotation, the vibrator can maintain stable working performance across customized hose lengths from 1m to 50m.
• Simpler jobsite handling: The integrated design eliminates the need to carry a separate external drive motor beside the operator.

3. Built for Common Single-Phase Jobsite Power

• Wide operating range: Guaranteed for AC 190–250V input around a rated AC 220–240V supply.
• 50/60Hz compatibility: Suitable for common single-phase power systems in international markets.
• Localized connection: Standard 3-pin 2P+E industrial male plug, with other correctly wired and compatible formats available for destination-market requirements.

4. Immersion-Ready Converter, Remote Control and Custom Reach

• Protected frequency converter: The converter sits inside a robust heat-dissipating housing designed for powered immersion. It can be dragged around the jobsite and submerged together with the complete machine as work progresses.
• No routine depth or runtime limit: The complete powered system is designed for continuous immersion in concrete slurry or muddy water.
• Dual wireless controllers: Two remotes are standard, allowing convenient start/stop control without returning to the converter.
• Project-specific reach: Standard 6m hose and 15m cable, with 1–50m hose options and custom cable lengths available on request.

Logistics & Packaging

• The vibrator head, hose, frequency converter, cable, industrial plug and remote controllers are secured as one complete system for shipment.
• Export packaging is selected according to order quantity, transport method and destination requirements. Reinforced protection and moisture-resistant packing can be provided for long-distance transport.
• Customized hose and cable configurations are checked and clearly identified before dispatch.

Storage & Care

• Rinse concrete residue from the vibrator head and hose after use, then wipe and dry the external surfaces before storage.
• Store the machine in a clean, dry and well-ventilated area. Protect the converter, cable and industrial plug from impact, crushing and improper bending.
• Coil the hose and cable without sharp bends. Inspect the power connection, grounding conductor and external seals before the next use.